Search

Search

logotype
logotype

Split Strain Relief Clamps

Download attachments:
Split Strain Relief Clamp PDF

Category:

Advanced Entrance Fittings – The Patton & Cooke split strain relief entrance fitting is ideally suited for installations where trailing cable couplers are not being used but where cables may be installed and moved frequently.

The split design means that the entrance fitting can be installed or removed without disturbing the stress cones, sleeves or taping which makes up the cable termination for quick and easy installation and removal without any tools! Available in 6 sizes which cover cable outside diameters from 2.76-3.50 inches (70-89mm) diameters 0.625″-3.625″(16-92mm). Larger sizes available on request.

Sizing

Split Strain Relief Clamps

Patton & Cooke

Catalogue No.

 Outside Cable

Diameter
11W-040-D-L 44.7-47.5 mm 1.76-1.87 in
11W-040-D-M 47.8-50.8 mm 1.88-2.00 in
11W-040-D-N 51.1-53.8 mm 2.01-2.12 in
11W-040-D-P 54.1-57.2 mm 2.13-2.25 in
11W-040-D-Q 57.4-60.2 mm 2.26-2.37 in
11W-040-D-R 60.5-63.5 mm 2.38-2.50 in
11W-040-D-S 63.8-66.5 mm 2.51-2.63 in
11W-040-D-T 66.8-69.9 mm 2.64-2.75 in
11W-040-D-U 70.1-72.9 mm 2.76-2.87 in
11W-040-D-V 73.2-76.2 mm 2.88-3.00 in
11W-040-D-W 76.5-79.2 mm 3.01-3.12 in
11W-040-D-X 79.5-82.6 mm 3.13-3.25 in
11W-040-D-Y 82.8-85.6 mm 3.26-3.37 in
11W-040-D-Z 85.9-88.9 mm 3.38-3.50 in
11W-040-E-L (c/w drilled flange holes) 44.7-47.5 mm 1.76-1.87 in
11W-040-E-M (c/w drilled flange holes) 47.8-50.8 mm 1.88-2.00 in
11W-040-E-N (c/w drilled flange holes) 51.1-53.8 mm 2.01-2.12 in
11W-040-E-P (c/w drilled flange holes) 54.1-57.2 mm 2.13-2.25 in
11W-040-E-Q (c/w drilled flange holes) 57.4-60.2 mm 2.26-2.37 in
11W-040-E-R(c/w drilled flange holes) 60.5-63.5 mm 2.38-2.50 in
11W-040-E-S (c/w drilled flange holes) 63.8-66.5 mm 2.51-2.63 in
11W-040-E-T (c/w drilled flange holes) 66.8-69.9 mm 2.64-2.75 in
11W-040-E-U (c/w drilled flange holes) 70.1-72.9 mm 2.76-2.87 in
11W-040-E-V (c/w drilled flange holes) 73.2-76.2 mm 2.88-3.00 in
11W-040-E-W (c/w drilled flange holes) 76.5-79.2 mm 3.01-3.12 in
11W-040-E-X (c/w drilled flange holes) 79.5-82.6 mm 3.13-3.25 in
11W-040-E-Y (c/w drilled flange holes) 82.8-85.6 mm 3.26-3.37 in
11W-040-E-Z (c/w drilled flange holes) 85.9-88.9 mm 3.38-3.50 in

 

ORDERING PROCEDURE: 

  • Determine the outside cable diameter.
  • Select the catalog number.

Example:

Cable diameter 2.75″
Split Strain Relief Cat. No. 11W-040-D-T

Related products

Read more

Rope Brakes