Split Strain Relief Clamps

Download attachments:

Advanced Entrance Fittings – The Patton & Cooke split strain relief entrance fitting is ideally suited for installations where trailing cable couplers are not being used but where cables may be installed and moved frequently.

The split design means that the entrance fitting can be installed or removed without disturbing the stress cones, sleeves or taping which makes up the cable termination for quick and easy installation and removal without any tools! Available in 6 sizes which cover cable outside diameters from 2.76-3.50 inches (70-89mm) diameters 0.625″-3.625″(16-92mm). Larger sizes available on request.


Sizing

Split Strain Relief Clamps

Patton & Cooke

Catalogue No.

Outside Cable

Diameter

11W-040-D-L 44.7-47.5 mm 1.76-1.87 in
11W-040-D-M 47.8-50.8 mm 1.88-2.00 in
11W-040-D-N 51.1-53.8 mm 2.01-2.12 in
11W-040-D-P 54.1-57.2 mm 2.13-2.25 in
11W-040-D-Q 57.4-60.2 mm 2.26-2.37 in
11W-040-D-R 60.5-63.5 mm 2.38-2.50 in
11W-040-D-S 63.8-66.5 mm 2.51-2.63 in
11W-040-D-T 66.8-69.9 mm 2.64-2.75 in
11W-040-D-U 70.1-72.9 mm 2.76-2.87 in
11W-040-D-V 73.2-76.2 mm 2.88-3.00 in
11W-040-D-W 76.5-79.2 mm 3.01-3.12 in
11W-040-D-X 79.5-82.6 mm 3.13-3.25 in
11W-040-D-Y 82.8-85.6 mm 3.26-3.37 in
11W-040-D-Z 85.9-88.9 mm 3.38-3.50 in
11W-040-E-L (c/w drilled flange holes) 44.7-47.5 mm 1.76-1.87 in
11W-040-E-M (c/w drilled flange holes) 47.8-50.8 mm 1.88-2.00 in
11W-040-E-N (c/w drilled flange holes) 51.1-53.8 mm 2.01-2.12 in
11W-040-E-P (c/w drilled flange holes) 54.1-57.2 mm 2.13-2.25 in
11W-040-E-Q (c/w drilled flange holes) 57.4-60.2 mm 2.26-2.37 in
11W-040-E-R(c/w drilled flange holes) 60.5-63.5 mm 2.38-2.50 in
11W-040-E-S (c/w drilled flange holes) 63.8-66.5 mm 2.51-2.63 in
11W-040-E-T (c/w drilled flange holes) 66.8-69.9 mm 2.64-2.75 in
11W-040-E-U (c/w drilled flange holes) 70.1-72.9 mm 2.76-2.87 in
11W-040-E-V (c/w drilled flange holes) 73.2-76.2 mm 2.88-3.00 in
11W-040-E-W (c/w drilled flange holes) 76.5-79.2 mm 3.01-3.12 in
11W-040-E-X (c/w drilled flange holes) 79.5-82.6 mm 3.13-3.25 in
11W-040-E-Y (c/w drilled flange holes) 82.8-85.6 mm 3.26-3.37 in
11W-040-E-Z (c/w drilled flange holes) 85.9-88.9 mm 3.38-3.50 in

ORDERING PROCEDURE: 

  • Determine the outside cable diameter.
  • Select the catalog number.

Example:

Cable diameter 2.75″
Split Strain Relief Cat. No. 11W-040-D-T

Next Event

Exponor 2017-Antofagasta
May 15-19, 2017

About Patton & Cooke Co.

Patton & Cooke was founded in 1961 by an electrical engineer and an electrical designer. Their guiding principle was simple: ...read more

Contacts

For information please contact us at:
  info@pattonandcooke.com/
  604-591-5374
  604-591-3505
  Unit 100 – 7795 128th Street
Surrey, B.C. Canada V3W 4E6